Semi-Auto Stitcher Solution
Overview
- Overview
- Features and Benefits
- Related Products
- Related Cases
- Related News & Events
- Related Solutions
- Contact us
Semi-Auto Stitcher Solution
As the variety of cartons increases with the diversification of products, there is a growing demand for smart and efficient packaging machinery.
The servo stitcher, used for nailing and forming cartons, accommodates both single and double nailing modes, and even offers a reinforced nailing feature. It operates at a high speed, capable of delivering up to 600 nails per minute and maintaining a minimum nailing distance of 100mm.

Features and Benefits
VEICHI servo semi-auto stitcher control system solution, equipped with the VC5 series PLC and the high-performance SD700 series servo drive that uses electronic cam control, the solution greatly enhances nailing efficiency while ensuring precise nail placement.
System Topology
To meet customer needs, VEICHI depends on our extensive industry experience to offer the VC5 PLC and SD700 series servo drive, ensuring precise and stable control of the equipment's nailing and paper feed mechanisms.

System Structure
Nailing Servo Mechanism
A 1:2 pulley system mechanically drives the line for automatic nailing.
Paper Feed Mechanism
A 1:3 pulley mechanism connects crankshafts to upper and lower pulleys for paper feeding.
Cylinder-Controlling Single/Double Nailing
The mechanism, controlled by a programmed cylinder, automates the output's ON/OFF status, offering single or double nailing mode, as well as a reinforced nailing mode (with double nail mode at the start and end and single nail in the middle).
System Function
VI20 HMI
The main interface displays alarm, yield, timer setting, mode options, and device reset function, etc.
VC5 Series Controller
Adopting EtherCAT bus mode to ensure precise control, the controller also simplifies wiring, and enhances equipment stability.

Conclusion
The VEICHI servo stitcher control system stands out for its efficiency, stability, strong anti-interference, and comprehensive features. It features our VC5 series PLC, SD700 servo controllers, and servo motors.
With multiple nailing modes and electronic cam control, the system offers continuous nailing, parameter input protection, and other user-friendly settings, so as to minimize manual labor and significantly boost production efficiency for customers.